| Dear Ms. Builder: We are remodeling our house and I would like
to add an acoustical tile ceiling in our family/play room. Is this a job that I
can do myself and are there attractive tiles available? Any tips? - Cindy E.
Dear Cindy: The answer to both of your questions is yes. Although
most people like the sound deadening characteristics of acoustical tiles, they
think of those big ugly tiles in a school, supermarket, etc. Nothing could be
further from the truth.
There are at least 50 various styles, textures and colors of residential
acoustical ceiling tiles available. Although you are most familiar with the
traditional white grid supports, they are actually available in attractive
wood-graining, black and brass.
I have installed many suspended tile ceilings and it can easily be a
one-person job. You should be able to do a typical room, start to finish, in
about one day. The only particular skill it requires is good planning and
attention to detail.
A suspended acoustical tile ceiling is an excellent choice for your
family/play room. First and most obvious, it reduces loud reverberating sounds
and can help block sound transmission to adjacent rooms. You'll appreciate this
on Saturday nights.
Second, suspended ceilings make it easy to run wiring to speakers, game
controls to the television, etc. It even simplifies the installation of
additional ceiling lighting if necessary. Light fixtures are specifically
designed to fit the common grid patterns.
There are significant variations among different types and brands of
acoustical ceiling tiles - sound-deadening, washability, color, styles, etc.
Read the product packaging carefully. Some so-called acoustical ceiling tiles
barely deaden noise at all.
Sound-deadening properties of acoustical tiles depend primarily on the
density and weight of the tile and the surface characteristics. If you look
closely, the surface of tiles, with a noise reduction coefficient of about 50%,
is a mass of tiny holes.
Some tiles are washable and others are not. Particularly if you have a
fireplace in your family room, I recommend a washable tile. The salesperson at
the ceiling tile outlet can help you with this.
Just a note about old tiles. The only method to renew the appearance of old
non-washable tiles is to paint them. In order to maintain the acoustical
properties, the tiny surface holes must not be clogged with paint. If you paint
tiles, use two or three very light coats of spray paint.
Your next decision is to select the edge treatment of your tiles. Most
acoustical tiles are available in three edge profiles - square, beveled and
notched. The beveled design provides a more contemporary appearance. The
notched ones tend to hide the support grids somewhat.
If you are not interested in running wires above the ceiling or additional
lighting, consider installing interlocking tiles that you either staple to
furring strips or glue directly to the ceiling.
Before you glue them to the ceiling, make sure this is what you want because
it is no easy task to remove them and restore the ceiling. With a suspended
ceiling, you can change the tiles whenever you like. Vary the types and
patterns of tiles for a unique decor.
When you install the grid pattern, pay attention to the manufacturer's
recommendations for the clearance of the dropped ceiling from the old ceiling.
Do not try to gain a little extra overall room height. If there is not enough
clearance, you will not have room to get the tiles in place.
If your room is slightly out of square, and whose isn't, snap a chalk line
down the center of the room splitting the difference. This leaves a similar
sized tile border on each side of the room and makes the out of squareness less
apparent.
Tools and materials required: saw, hammer, chalk line, tape measure, wire
cutter, pliers, support grid pieces, hanger wire, hooks, tiles.
Send questions to: Ms. Builder, 6906 Royalgreen Dr., Cincinnati, Ohio 45244 or
visit www.dulley.com/msbuilder.
|